The integrated control system, power module, and cooling tank are housed in one unit designed for operation in confined site spaces.
Digital design with an upgradeable operating system for centralized setup, storage, and synchronized control of all-position welding parameters. Minimum arc-start current as low as 3A for stable thin-wall tube welding. Suitable for semiconductor, chemical, food, pharmaceutical, and electronics piping.
| Power Supply Type | Inverter |
|---|---|
| Welding Current | 3A – 200A |
| Duty Cycle (40°C, 10 min) | 200A@60% · 100A@100% |
| Open-Circuit Voltage | 67V |
| Input Voltage | Single-phase 110V / 220V |
| Power Factor | 85.3% |
| Weld Head Cooling | Built-in recirculating cooling water |
| Control Functions | DC, pulse, gas, rotation, printing, water cooling |
| Stored Programs / Segments | 200 Programs / 6 Segments |
| Insulation / Protection Class | F / IP21 |
| Weight | 28 kg (including 4L cooling water) |
| Dimensions | 340 × 340 × 310 mm |
Equipment is selected to suit project conditions, with commissioning and after-sales service provided by the same team.
Built-in water cooling; suitable for stainless steel, carbon steel, alloys, and other materials, covering pipe diameters from φ3.175–168mm.
Weld Head Selection →LPM SERIES
High-precision end facing for thin-wall stainless steel tubes, producing square ends with minimal burrs. Cordless and corded models available.
View Models →X3 / X4 / X12 / HF-4.5 / Xa8
Cold cutting without coolant. Square cut ends are ready for welding; most models support beveling.
View Models →Power Supplies · Weld Heads · Tube End Facing Machines · Pipe Cutters — One-Stop Selection and On-Site Technical Support