HANFENG INTELLIGENT TECH

Get a Quote →

Home / Products / Orbital Pipe Cutter

Orbital Tube Cutting

Orbital Pipe Cutter

Cold cutting without coolant. Square cut ends are ready for welding. Covers pipe diameters from 6–350mm.

Orbital Tube Cutting

Orbital Pipe Cutter

Compact and portable for project sites and factory floors; the power cable rotates without tangling.

Cold Cutting, Burr-FreeSquare-cut ends are ready for direct welding

No Coolant RequiredKeeps the weld area clean to help ensure weld quality

Efficient CuttingCuts φ88.9×3.05mm stainless steel pipe in approximately 30 seconds

Beveling AvailableX3 / X4 / X12 / Xa8 support beveling

X3 Orbital Pipe Cutter

X3

Cutting Range: 6–76mm
Wall Thickness: 1–7mm
Power: 1300W
Net / Gross Weight: 37/48kg
Beveling: Yes

X4 Orbital Pipe Cutter

X4

Cutting Range: 12.7–120mm
Wall Thickness: 1–7mm
Power: 1300W
Net / Gross Weight: 50/60kg
Beveling: Yes

Xa8 Orbital Pipe Cutter

Xa8Manual Crank

Cutting Range: 125–225mm
Wall Thickness: 2–8mm
Power: 1600W
Net / Gross Weight: 120/135kg
Beveling: Yes

X12 Orbital Pipe Cutter

X12

Cutting Range: 150–350mm
Wall Thickness: 2–8mm
Power: 1300W
Net / Gross Weight: 95/115kg
Beveling: Yes

HF-4.5 Orbital Pipe Cutter

HF-4.5

Cutting Range: 12.7–114mm
Wall Thickness: 1–3mm
Power: 1300W
Net / Gross Weight: 18.5/34.5kg
Beveling: No

Voltage / Frequency: 220V / 50Hz · Cutting Material: Metal

Related Products

Complementary Equipment

Equipment is selected to suit project conditions, with commissioning and after-sales service provided by the same team.

Tube End Facing Machine

LPM Tube End Facing Machine

High-precision end facing for thin-wall stainless steel tubes, producing square ends with minimal burrs. Cordless and corded models available.

View Models →HF-170 / 120 / 80 / 40 / 5H / U35

Enclosed Orbital Weld Head · Tube-to-Tubesheet Weld Head

HF Series Enclosed Orbital Weld Head

Built-in water cooling; suitable for stainless steel, carbon steel, alloys, and other materials, covering pipe diameters from φ3.175–168mm.

Weld Head Selection →HF-W200A

Programmable Welding Power Supply

HF-W200A Programmable Welding Power Supply

Inverter power supply with integrated control system, power module, and cooling tank, enabling centralized management of all-position welding parameters.

Share the pipe diameter, wall thickness, and material, and we will recommend a complete configuration.

Power Supplies · Weld Heads · Tube End Facing Machines · Pipe Cutters — One-Stop Selection and On-Site Technical Support

400-8871168Request a Quote →